|
|
| PROshift + |
| PROshift+ doubles the data volume on all digital SLR cameras with interchangeable lenses. With the Canon EOS 20 D, for instance, you get up
to 20 megapixels; with the CANON EOS D60 or 10 D models, 16 megapixels...and equivalent gains with other similarly adaptable cameras.
Fitted to a NOVOFLEX bellows, the NOVOFLEX PROshift+ is used to take 2 or 3 individual shots using parallel shift and multiple exposures. These partial images are then merged automatically to a complete image using an appropriate program (Canon Photo Stitch, Photoshop CS
Photomerge, etc.). |
|
| |
Photomerge has an advantage here because it supports fine corrections of the individual images at separate levels. The
image or file size, and thus the print quality is increased 2x to 2.4x, depending on the sensor size. This also applies to future cameras with 8,
10 and 12 megapixels! The procedure is straightforward: photographers looking for extra quality mount single images manually in 16-bit mode
to easily create file sizes of up to 90 Mbytes with cameras in the 6-megapixel class! The procedure is suitable for all still-life takes, plus many
landscape and architecture shots where there is no change during the 3 exposures.
To obtain 3 separate files suitable for mounting, the lighting should be identical and the exposure setting (shutter speed/aperture) plus the
white balance should be fixed manually. In combination with the NOVOFLEX BALPRO 1 or BALPRO T/S universal bellows, the useful focal
length is between 80 and 150 mm, with the effective focal length approximately halved by the larger image field. In effect, the image area
taken with a focal length of 150 mm corresponds to a single image taken at about 80 mm. At the same time, the sometimes unwanted increase
in focal length is more than compensated for by the smaller chip size.
The NOVOFLEX PROshift+ adapter can be tilted for portrait or landscape format and offers all the benefits of the interchangeable NOVOFLEX
adapter system, so that a change of the camera system won‘t present any new problems. |
|
|
|
|
| |
 |
Technical Data |
|
|
| Order code |
PROshift+ |
| Dimensions |
105 x 125 mm (4.13 x 4.92”) |
| Travel |
25 mm (0.98”) |
| Weight |
270 g (0.59 lbs) |
| Compatible bellows |
NOVOFLEX BALPRO 1 and BALPRO T/S universal bellows |
|
|
|
| |
|
|
