KALABHAI
Kalabhai . Products . Quality . Media Room . Careers . Contact
PHOTO + OPTICS  
Digi-cabi . ExpoDisc . NOVOFLEX . Berlebach
flash holding systems
FLASH-GRIFF. Mounted on the newly-developed camera base plate, the grip offers a convenient method for positioning one of today’s large flash units either by screwing it directly to the ball head or sliding it into the flash shoe on the tilt head. Flexible flash alignment and a hand strap that lets you keep a firm hold on the whole unit are two of the grip’s outstanding features. The grip can be unscrewed from the base plate and stowed away during transport.
 
XX-HALTER. This Duo-Flash holder for optimal positioning of two flash units is the outcome of extensive testing and many years’ experience.
The Duo-Flash holder does away with earlier compromises between fast handling and compact design. Now positioning of the two flash units is completely flexible and adjustment is lightning fast. The camera base plate is attached to the underside of the camera, the vario system supports two ball heads with flash shoes, and can be rotated and shifted freely. Because a ball head can be mounted virtually
anywhere along the rails, a vast number of different flash positions is possible. And the whole system is quick and easy to reconfigure. The flexible design means the Duo-Flash holder can be dismantled very quickly; the resultant small package fits into most camera bags.
 
Technical Data
Order code FLASH-GRIFF XX-HALTER
Total weight 450 g ( 0.99 lbs) 370 g ( 0.81 lbs)
Dimensions Grip Ø 4.0 cm (1.57“) 36 x 4 x 8 cm (14.17 x 1.57 x 3.14“)
Length 13.8 cm (5.43“)  
Base plate 25 x 4 x 0.8 cm (9.84 x 1.57 x 0.31“)  

 
 
 
 
UNISET. This flash holding system with sliding rods consists of a rigid camera plate with two jointed rods (horizontal and vertical) and two non-jointed rods. The system is capable of mounting even heavy flash units in any desired position and can also be used to precisely position video lights, microphones and fill-in light panels.

UNIMARM. This flash holding system consists of a rigid camera base plate with two flexible arms that can hold the flash units in any position. A ball joint with a flash shoe is attached at the end of each flexible arm. The arms can be easily adjusted to position the flash units precisely.
 
Technical Data
Order code UNISET Order code UNIMARM
Total weight 900 g (1.98 lbs) Total weight 1260 g (2.77 lbs)
Base plate 245 x 80 x 40 mm ( 9.64 x 3.14 x 1.57“) Base plate 245 x 80 x 40 mm (9.64 x 3.14 x 1.57“)
Traverse 220 mm each (8.66“) Arm length 495 mm each (19.48“)
Maximum flash distance 560 mm (22.04“)    
 
 
© 2008 KALABHAI  
DESIGN . HYPHEN