KALABHAI
Kalabhai . Products . Quality . Media Room . Careers . Contact
DENTAL  
Consumables . Equipment

Steam Cleaner
1. D-S 100 A steam jet unit

The new D-S 100 A steam jet unit achieves a maximum level of quality and reliability. It enables a trouble-free and quick cleaning, extraction or thorough degreasing in any type of laboratory application. The D-S 100 A is fitted with permanent water connection and can additionally be filled manually at any time. With a very powerful heating the instrument is ready for operation after only 4-5 minutes heating time. The current boiler pressure is displayed in the clearly visible manometer. The very efficient electronic decalcifying unit enables to operate the plat with normal tap water. Dry and moist steam can be selected. A leakage fuse switches the unit off in case of any faults. A splash deflector is available as accessory.		  
     
2. D-S 100 steam jet unit

The D-S 100 is largely similar to the D-S 100 A, but has a simpler design. The unit has only manual water supply. An acoustic signal and a display inform the operator when the water tank is almost empty. The signal continues until the tank is refilled. Overflowing during refilling is virtually impossible. The unit may be refilled during operation, rendering the time-consuming reduction of the boiler pressure unnecessary. The slip-resistant handpiece is made from special heat-insulating plastic. The housing is made from varnished stainless steel. The unit can be used as table or wall unit. The steam jet is released with the  foot switch. A splash deflector is available as accessory.t 		 
     
3. Elmasteam

Steam cleaners for maximum performance

  1. High performance steam, adjustable from 1 to 8 bar for intensive pre-cleaning before ultrasonic cleaning followed by gentle rinsing with 3 bar
  2. Compressed air for blow-drying and drying after cleaning or rinsing with steam
  3. Modular concept for individual configuration of units and unit options as well as for optimised service
  4. 3 models
    Elmasteam 3 Space saving compact unit. Powerful, solid and very effective.
    Elmasteam 5 As Elmasteam 3, with bigger capacity for longer use.
    Elmasteam 10 For industrial use and constant, large quantity of steam. 2 exits, fixed nozzle and/or flexible hand piece selectable.

Standard version

  1. Analogue steam pressure display
  2. LED display for operating status
  3. Manual water fill
  4. Compressed air connection for drying
  5. Use of ordinary tap water possible
  
 
 
 
   
         
Aquamatic – for Automatic water fill3760170000   Sieve basket small
Sieve basket largeCoated pincers		   Useful catch basin, simple to connect
 
Technical Specification   Elmasteam 3   Elmasteam 5   Elmasteam 10
Code   3760100000   3760200000   3760300000
             
Voltage (Vac)
Mains connection
Power requirement (VA) max.
Pressure inside pressure tank (bar)
Volume in pressure tank (liter)
Steam exit temperature oC
Outer dimensions w/d/h (mm)
Weight
Casing material		   230
1-phase
1790
8
3
ca. 160 oC
288 / 305 / 315
15.8 kg
Stainless Steel		   230
1-phase
2950
8
5
ca. 160 C°
288 / 305 / 405
21.4 kg
Stainless Steel		   230
1-phase
2950
8
10
ca. 160 C°
288 / 305 / 650
28.4 kg
Stainless Steel
 
Please select option – Default is flexible hand piece 3760160000
             
Version A: fixed nozzle with foot pedal
Version B: flexible hand piece
Version A+A; A+B; B+B Hot water option		   Yes   Yes   Yes
Yes
Yes
             
 
   
© 2008 KALABHAI  
DESIGN . HYPHEN