Characteristics:
The MTplus is a compact yet very high performing model trimmer that can be employed for either wet or dry trimming. The motor is capable of outputting 1,300 W (at 230 V) or 2.0 hp (at 120 V). This power means event he hardest plaster is removed with ease.
Features:
Technical details
- The housing is made of a new, special material: (PU = polyurethane) which is both sound dampening and resistant.
- Trimmer table: can be removed without tools; with precision adjustment and precision angle lines.
- Water adjustment: Water volume can be individually regulated for optimum cleaning.
- Safety: Motor and water flow are stopped by an interlock switch when the front door is opened.
- Motor power: 1,300 W (at 230 V) or 2.0 hp (at 120 V) guarantees maximum torque.
- Ergonomics: Ergonomic work position due to the angled position of the MTplus.
Details
Wet or dry trimmer
Only a few adjustments convert the trimmer from wet to dry operation. The interior is designed to provide optimum flow currents in both the wet and dry operating modes.
Wet trimming:
- Connect the water inlet and
- Water outlet.
- Insert the spray pipe.
Dry trimming:
- Connect the extractor (f. ex. Renfert Vortex compact 2L with cloth filter).
- Remove the spray pipe.
Precision and Functionality
The adjusting wheel inside the table base is connected to the trimmer table by a fine thread. This allows the highest degree of precision for the adjustment of the angle to the trimmer disc. Once the correct angle has been adjusted, a locknut secures the position. A right-angle gauge is included for a precise 90° adjustment. Lines for trimming at 25°, 55°, 60°, 65°, and 120° angles have been laser-engraved in the model table. These simultaneously ensure that suction does not cause the plaster model to adhere to the table.
Design Know-how Down to the Last Detail
The MTplus has been designed so that all cleaning, conversion, and adjustment procedures can be performed quickly and easily, without any tools.
The quick-release lock on the side opens the trimmer door. The door can also be removed from its hinges for easy cleaning.
With the door open, the trimmer table can be removed by a single handle.
The spray pipe is secured to the housing by a plug-in connection and can be easily removed for conversion from wet to dry operation or cleaning.
The Allan key used to replace trimmer discs is stored on the top, left-hand side of the unit, behind the trimmer door so that it is always at hand.
Important information:
Can Operate with Any Trimmer Disc
The new MTplus can be equipped with:
a partially diamondcoated disc = Marathon,
a fully diamond-coated disc = Infinity, or
a silicon carbide disc = Klettfix
The Marathon disc is used for dry trimming |
